HOSE CLAMP 2 PCS OO-HOZ1712
- Strong galvanized hose clamp 25 mm OO-HOZ1712. Set of 2 pcs. Ideal for garden and technical hoses. Provides a tight, secure connection in home and garden installations.
Hose clamp 25 mm - set of 2 pcs. OO-HOZ1712 | Robust galvanized hose clamps for garden and technical hoses
Ensure a secure and tight hose fit with these high-quality, galvanized hose clamps.
Designed to provide maximum grip and easy adjustment.
Durable galvanized construction provides long-lasting protection against rust and corrosion.
25mm diameter. Package of 2 pieces.
HOSE CLAMPS 2 SZT OO-HOZ1712 is a sturdy set of two metal clamps, designed to quickly and securely fix hoses with a diameter of 25 mm. Thanks to the galvanized steel and convenient tightening mechanism, the ties guarantee high tightness of the connection, minimizing the risk of leaks, pressure drops and accidental slipping of the hose from the spigot. It is an indispensable piece of equipment for work in the garden, workshop, garage and for domestic water installations.
OO-HOZ1712 ties are ideally suited for garden hoses, pump and hydrofoil hoses, water lines in irrigation systems, and many other applications where a durable and tight connection is important. Thanks to a simple clamping system, installation does not require specialized tools - the clamp can be tightened with a typical wrench or screwdriver, and quickly loosened and readjusted if necessary.
What is a Hose Clamping Band 2 Pcs OO-HOZ1712?
This is a set of two metal clamps with a diameter of 25 mm, made of galvanized steel. They are used to mechanically clamp the hose to the spigot, coupling, pump wading, garden faucet or other plumbing component, providing a stable and tight connection. Thanks to the galvanized coating, the ties are resistant to corrosion, which translates into a long life even in heavy outdoor use.
Where the hose clamp OO-HOZ1712 is installed?
Ties are used wherever a hose must be securely seated on a spigot or fitting:
- at the end of a garden hose connected to a faucet or quick coupler,
- on discharge and suction hoses for garden pumps, dirty water pumps, hydrophores,
- in garden irrigation systems - at distributors, tees and valves,
- in domestic and workshop water installations where connection reinforcement is required,
- in technical installations, such as for fixing water pipes in washers, tanks or industrial equipment.
Key applications:
- gardening - attaching garden hoses to faucets, pumps, sprinklers;
- house and plot - connecting hoses to tanks, rain barrels, irrigation systems;
- workshop and garage - protecting water lines in washing and service equipment;
- technical applications - installation of hoses in water systems with a diameter of 25 mm.
HOSE CLAMPING CLAMP 2 Pcs OO-HOZ1712 - high quality, durable construction, corrosion protection
One of the key advantages of the OO-HOZ1712 kit is its robust, galvanized construction. Zinc-coated steel is much more resistant to moisture, water and changing weather conditions than unprotected steel. This makes the ties excellent for outdoor use - in the garden, on the allotment or in domestic water installations - for a long time maintaining full functionality.
Durability and reliability in daily use
Galvanizing prevents the rapid formation of rust, and a well-designed clamping mechanism ensures stable pressure around the hose's circumference. This design ensures many years of trouble-free use. Even with frequent unscrewing and reassembly, the screw threads and ribbing on the clamping strip maintain their efficiency.
Examples of daily applications:
- Seasonal connection of the garden hose to the outdoor tap - the clamp ensures a rigid and tight connection, even when the hose is frequently disconnected and moved.
- Attaching a hose to a submersible pump in a sump or pond - thanks to its corrosion resistance, the clamp can withstand periodic contact with water and wet environments.
- Permanent clamping of the water supply hose to the rainwater tank - no leaks reduces water loss and increases the convenience of the installation.
Easy installation of OO-HOZ1712 cable ties - quick adjustment and secure fit
The OO-HOZ1712 clamp is designed to provide maximum grip and easy adjustment. The mechanism is based on the popular screw system, so all you need to install it is a classic screwdriver or a small wrench. This solution is convenient for both professionals and home users who need fast, simple and trouble-free clamping.
Simple operation without specialized tools
To install the band:
- You slip the hose clamp over the hose before attaching it to the spigot.
- You slide the hose onto the fitting or spigot of the device.
- You move the band to the place where you want to make the pressure.
- You tighten the screw until you feel a clear resistance and stable tightening.
Daily examples of the use of rapid adjustment:
- In the garden, when you replace the end of the hose with another - just loosen the screw, move the band and tighten it again.
- In the workshop, when testing different hose connection configurations - one clamp can be used multiple times on different hoses of the same diameter.
- On the plot, when you need to extend the hose in an emergency, connecting two sections on the spigot - ties allow you to create a solid connection without specialized fittings.
Thanks to a simple adjustment system, you can fine-tune the clamping force, thus avoiding both too weak clamping (which risks leaks) and over-compression (which can damage the hose). This is a compromise between safety and gentleness for the cable material.
Diameter 25 mm and set of 2 pieces - perfect fit for popular garden hoses
The ties in the OO-HOZ1712 set have a nominal diameter of 25 mm, which corresponds to one of the most common dimensions of garden and technical hoses. This makes the product very versatile - you will successfully use it in most home, garden and workshop water systems.
Set of two = more options
The package includes 2 zip ties, which allows:
- on one side, secure the connection at the tap, and on the other side at the pump or sprinkler,
- use two ties on one section of hose for maximum security and tightness,
- keep one tie as a spare in case of installation modifications or failures.
Examples of situations where a diameter of 25 mm is ideal:
- Standard garden hose used for watering plants, washing the car, patio or driveway.
- Water supply line for outdoor garden shower or children's pool.
- Discharge hose in a small garden pump used to pump rainwater from a reservoir to an irrigation system.
Selection of the correct diameter of the clamp is crucial - this ensures adequate pressure around the circumference of the hose, without deforming it. The OO-HOZ1712 kit guarantees an optimal fit for hoses with a diameter of 25 mm, which translates into reliability and comfort of use.
Safe and leak-free installation with hose clamp OO-HOZ1712
A properly selected and properly installed clamp is one of the most important components of a safe water system. Model OO-HOZ1712 is designed to minimize the risk of leaks, unsealing and accidental slipping of the hose from the spigot under water pressure or mechanical stress.
How the tie affects the safety of the installation?
- Stabilizes the hose in one position so that it does not slip from the spigot even when the valve is opened abruptly.
- Uniform pressure around the perimeter reduces the possibility of micro-pitting and water dripping.
- Combined with a suitable hose, it reduces the risk of the hose "shooting out" at higher pressures.
Daily examples of the benefits of secure attachment:
- When watering your garden, you can unroll the entire hose without worrying about a leak or the hose slipping on the fitting at the faucet.
- When pumping water from a tank to another container or irrigation system, you don't lose pressure due to a leaking connection.
- When washing a car, paving stones or facades, you don't have to correct the hose on the spigot every now and then.
When you invest in a simple but effective solution like OO-HOZ1712 zip ties, you gain peace of mind, convenience and safety of use the entire water system around the house, garden and workshop.
Technical data of hose clamp 2 pcs OO-HOZ1712
- Model: OO-HOZ1712
- Product type: hose clamp
- Nominal diameter: 25 mm
- Material: galvanized steel
- Resilience: increased resistance to rust and corrosion
- Number of pieces per package: 2
- Application: attachment of garden and technical hoses to spigots, couplings, pumps, valves, etc.
- Purpose: home, garden, workshop, water and technical installations
- Product code / symbol: OO-HOZ1712
- EAN code: 5010646031721
With a combination of simple design, universal diameter and resistance to the elements, the OO-HOZ1712 hose clamps are a practical and economical choice for anyone who wants to create a leak-proof and trouble-free plumbing system in the home, garden or workshop.
FAQ - Frequently asked questions about hose clamp 2 pcs OO-HOZ1712
Question 1: For which hoses the OO-HOZ1712 hose clamp fits?
Answer: The OO-HOZ1712 clamp is designed for hoses with a diameter of about 25 mm. This is a very popular dimension used in garden and technical hoses. In the case of hoses with slightly smaller or larger diameters (within tolerance), it is possible to adjust accordingly by adjusting the clamping screw.
Question 2: Can the bands be used outdoors all year round?
Answer: Yes, thanks to being made of galvanized steel, the ties stand up well to outdoor conditions such as moisture and temperature changes. However, for maximum longevity, it is recommended that the installation be inspected seasonally and that metal components be cleaned of deposits and contaminants, if necessary.
Question 3: Are special tools needed for installation?
Answer: No, a standard screwdriver or small wrench is sufficient for installation. This makes the armbands very convenient to use for both professionals and home users.
Question 4: Is one band enough to make the connection tight?
Answer: In most typical applications, one properly sized and tightened clamp is completely sufficient. For installations operating at higher pressures or where safety is particularly important, two ties can be used on a single connection, thereby increasing the security of the fastening.
Question 5: Are the bands suitable for utilities other than water?
Answer: Standard OO-HOZ1712 ties are used in water and garden installations. In many cases, they can also be used to secure hoses in which other neutral media are transported, but always make sure that the hose material and operating conditions are suitable for the use of galvanized steel ties.
Question 6: How many bands are included in the set?
Answer: The set includes two zip ties. This allows you to secure two connections at the same time or have one tie as a spare for future applications.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.