CLEAN WATER SUBMERSIBLE PUMP SP 3501C OB-SP3501C
- SP 3501C clean water submersible pump (350 W, 5000 l/h) ideal for draining basements, garages, tanks and swimming pools. Starts at 35 mm, pumps down to 3 mm, 1" and 32 mm connection.
What is the submersible pump for clean water SP 3501C OB-SP3501C?
SP 3501C OB-SP3501C submersible pump for clean water is a compact, powerful and easy-to-use device designed for fast pumping of clean or slightly polluted water. Thanks to the power 350 W and maximum capacity 5000 l/h ideal for single-family homes, farms, workshops and small service companies. The pump is immersed directly in the water, and its task is to quickly lower the water level in flooded rooms, tanks, sumps and other spaces requiring drainage.
The SP 3501C is designed for users who want reliability, simplicity of installation and near maintenance-free operation. The device is characterized by the ability to start at a very low water level - just 35 mm - and pumping out the water to a level of about 3 mm, which allows to almost completely dry the surface. This makes the pump an excellent tool in the fight against the effects of flooding, heavy rainfall and flooded basements or garages.
Where the submersible pump SP 3501C OB-SP3501C is installed?
Submersible pump SP 3501C OB-SP3501C is a mobile device - it does not require permanent, complicated installation. All you need to do is place it in the place from which you want to drain water, connect the discharge hose and the electrical power supply. Due to its design and technical parameters, it is mainly used in:
- cellars and garages - For the rapid removal of water after flooding, waterlogging or installation failures;
- manholes and rainwater tanks - For draining and controlling the water level;
- pools, ponds, garden tubs - For seasonal emptying or replacement of water;
- utility and technical rooms - Where periodic drainage is required.
The device is connected to the hose with a standard connection 1" (25 mm) and 32 mm, which allows it to work with commonly available garden hoses and discharge hoses. Thanks to its small size, the pump will fit into narrow sumps and hard-to-reach spaces.
Application of submersible pump for clean water SP 3501C OB-SP3501C
The SP 3501C pump is designed to pump clean or slightly polluted water with a maximum diameter of impurities up to 3 mm. This means that the water may contain fine impurities, such as sand or silt, but not larger solid elements. Typical applications include:
- Drainage of basements and garages - With heavy rainfall or rising groundwater levels.
- Emptying of tanks and swimming pools - at the end of the season or before cleaning.
- Rainwater pumping - From rainwater tanks to garden irrigation systems.
- Emergency drainage of water - in case of a water leak, flooding of the bathroom or boiler room.
With mains power supply 230 V and operation at a frequency of 50 Hz the pump is compatible with standard electrical installations in residential and commercial buildings.
Submersible pump for clean water SP 3501C - data from the manufacturer's description
SP 3501C submersible pump for clean water
Power 350W
Maximum capacity of 5000l/h
Maximum lifting height 6m
Starts at minimum water level of 35 mm, pumps out to 3 mm
Maximum diameter of impurities 3mm
Hose connection 1" (25 mm) and 32 mm
Technical specifications:
| Engine power | 350 W |
| Voltage | 230 V |
| Frequency | 50Hz |
| Maximum output | 5000l/h |
The most important advantages of the submersible pump for clean water SP 3501C OB-SP3501C
The SP 3501C pump is distinguished by its combination of high functionality and ease of use. Key advantages include:
- High output of 5000 l/h - rapid removal of large amounts of water in a short period of time.
- Low takeoff - 35 mm - ability to work even with very little water.
- Draining to approximately 3 mm - effective almost complete drying of the surface.
- Compact design - easy portability and storage of the device.
- Universal hose connections - 1" (25 mm) and 32 mm for standard hoses.
SP 3501C OB-SP3501C submersible pump for clean water - 5,000 l/h capacity for fast drainage
One of the most important features of the SP 3501C OB-SP3501C submersible pump is its high capacity - as much as 5000 liters per hour. This means that significant amounts of water can be pumped out in a short period of time, which is crucial in emergency situations such as sudden flooding of the basement after heavy rainfall. High efficiency reduces drainage time, reduces the risk of dampness on walls and floors, and reduces property damage.
The pump has a power output of 350 W, which, combined with an efficient hydraulic design, ensures an optimal ratio of energy consumption to the amount of water pumped. This makes the SP 3501C not only effective, but also economical to operate. Maximum water head of 6 m allows water to be pumped to higher drains, manholes or sewers, which is especially important in buildings with multi-level basements.
In daily use, the high efficiency of the pump will prove m.in. at:
- emptying a medium-sized garden pool - instead of waiting all day, the process can be shortened to a few hours,
- pumping water from a large rainwater tank - when you want to use the water to water the garden or empty the tank before winter,
- emergency drainage of the basement - quick drainage of water minimizes the risk of equipment damage and mold growth.
Low take-off and pump-out up to 3 mm - protecting rooms from moisture
The SP 3501C OB-SP3501C pump has been designed to start working at as low as minimum water level of 35 mm. This is a huge advantage in situations where you want to start dewatering as soon as possible - you don't have to wait for the water to reach a high level for the pump to start working. The earlier we start the pump-out process, the less risk of damage to the building.
Equally important is the pump's ability to drain water to a level of approx. 3 mm. In practice, this means that only a thin layer of water remains on the floor, which can be easily removed with a mop or squeegee. With this:
- the floor dries much faster,
- the risk of efflorescence and mold formation is reduced,
- the need for additional building dehumidifiers is reduced.
In everyday applications, this feature works well, for example:
- garages after flooding from melting snow or an intense downpour,
- laundries and boiler rooms where there has been an installation failure or equipment leakage,
- utility rooms where sensitive materials are stored, such as wood, cardboard boxes or electronics.
Versatile use of the SP 3501C pump - home, garden and workshop
The SP 3501C OB-SP3501C submersible pump for clean water is a versatile choice - it will work well in typical domestic applications, as well as in small service companies or workshops. With the ability to pump water with contaminants up to 3 mm can handle rainwater, pool water and light sediment.
In the home and garden environment, the device can be used m.in. to:
- emptying rainwater tanks - For example, before winter or when you want to transfer water to another container,
- pumping water from a pond - When cleaning or upgrading the tank,
- drainage of terraces and driveways - In case of stagnant water after heavy rainfall.
In workshops and small service workshops, the SP 3501C is useful for:
- removal of process water from tubs and tanks,
- emergency pumping of water from technical rooms,
- temporary pumping of water between reservoirs.
Thanks to the power supply 230 V / 50 Hz the pump can operate virtually anywhere with access to a standard electrical outlet, without the need for specialized connections.
Design and convenience of use - practical design of the SP 3501C pump
The SP 3501C OB-SP3501C pump is designed for ease of use and high mobility. The compact body makes it easy to carry, and the ergonomic handle allows you to transport the device comfortably even with work gloves. Housing made of durable corrosion-resistant plastic stands up well to contact with water and typical contaminants found in basements or tanks.
Hose connection with a diameter of 1" (25 mm) i 32 mm allows the use of popular garden hoses, which further reduces operating costs - there is no need to purchase special tips. This allows the pump to be connected to the hose with which you water your garden on a daily basis, and to easily discharge the water to a safe place, such as on the lawn, into a drainage ditch or stormwater drainage system (in accordance with local regulations).
In daily use, users will also appreciate:
- easy start-up - just connect the pump to the power supply, submerge it and make sure the hose is routed to the right place,
- low weight - important when frequently moving the pump between different rooms and tanks,
- simple maintenance - periodic cleaning from fine deposits allows to maintain high performance for a long time.
Safety and durability - reliable operation of the SP 3501C pump for years to come
The SP 3501C OB-SP3501C submersible pump for clean water is equipped with a modern electric motor with a power of 350 W, suitable for intensive work in domestic and semi-professional conditions. The design solutions used are aimed at protecting the device from overloading and overheating, which directly translates into an extended life of the pump.
Pump body made of sturdy plastic and seals that protect the electrical part from contact with water ensure safe operation. Compared to improvised dewatering methods (such as hand-picking water with buckets), the use of the SP 3501C pump is not only much faster, but also safer and less physically demanding for the user.
Thanks to its resistance to fine dirt (up to 3 mm) the device copes well with typical conditions in basements, sumps or garden tanks, which often contain fine sand particles, leaves or light deposits. Regular inspection of the condition of the hose and periodic cleaning of the body and water inlets will keep the pump in excellent condition for many seasons to come.
Technical specifications of submersible pump SP 3501C OB-SP3501C
Collected below are the most important technical parameters of the model:
| Engine power | 350 W |
| Supply voltage | 230 V |
| Frequency | 50 Hz |
| Maximum output | 5000 l/h |
| Maximum lift height | 6 m |
| Minimum launch level | 35 mm |
| Pumping level | till about. 3 mm |
| Maximum diameter of impurities | 3 mm |
| Hose connection | 1" (25 mm) and 32 mm |
| Application | Clean and slightly polluted water |
FAQ - frequently asked questions about the submersible pump SP 3501C OB-SP3501C
1. Can the SP 3501C pump dirty water with sand and silt?
The SP 3501C pump is designed for clean and slightly polluted water. The maximum diameter of impurities is 3 mm. This means it can handle fine particles, but it is not designed for pumping thick sludge, mud or water with lots of rocks and leaves. For such applications, choose a pump typically used for dirty water.
2. What hose can I connect to this pump?
The pump has a hose connection 1" (25 mm) and 32 mm. So you can use standard garden hoses or discharge hoses of these diameters. Choosing a larger diameter hose usually results in better flow and faster drainage.
3. To what minimum level will the pump pump out water?
SP 3501C model starts at minimum water level 35 mm, and then can drain the water to a level of about 3 mm. The remaining thin layer of water can be removed by hand, such as with a mop or squeegee.
4. Is the pump suitable for draining a garden pool?
Yes, this is one of the typical applications of the SP 3501C pump. High efficiency 5000 l/h allows you to empty your garden pool, rainwater tank or pond relatively quickly. You just need to make sure that the water does not contain more than 3 mm of dirt.
5. Can I use the pump in a residential area, such as a basement with electrical outlets?
Yes, the pump is powered by standard voltage 230 V, therefore, it can be used in typical domestic conditions. However, you should always follow safety precautions: use grounded outlets, avoid contact between the plug and the outlet with water, and according to the instructions for use, ensure that the power cord is routed safely.
6. How to take care of the pump to make it last as long as possible?
After work, it is a good idea to rinse the pump of sediment, check the patency of the water inlets and the condition of the hose. By storing the device in a dry and clean place, we protect it from corrosion and mechanical damage. Periodic inspection of the power cord and connections will ensure safe and trouble-free use for many seasons to come.
7. Can the SP 3501C pump operate outdoors?
The pump can be used outdoors - in rainwater tanks, ponds or sumps - as long as electrical safety rules are followed. Avoid leaving the plug and outlet in areas subject to flooding and protect the power cord from mechanical damage.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.