ROTOJET LANCE FOR PW 110C 68500045
- ROTOJET lance 68500045 for Oleo-Mac PW 110C washer - original turbo lance with rotary nozzle. Maximum cleaning power for pavers, concrete, rims and machinery. Ideal for the toughest dirt. EAN 8026619048549.
ROTOJET lance for Oleo-Mac PW 110C washer 68500045 - maximum cleaning power under high pressure
ROTOJET lance for PW 110C 68500045 is a professional rotary lance for Oleo-Mac PW 110C high-pressure cleaner, designed for the most demanding cleaning work. Thanks to the creation of the turbine effect, the lance significantly increases the working pressure of the water jet, which translates into above-average efficiency in removing even the most difficult dirt - oil sludge, old mud, lichen, raid from paving stones or dried paint.
What is the ROTOJET lance for PW 110C?
The ROTOJET lance is a specialized attachment for a high-pressure washer, finished with a rotary nozzle (turbojet). The water is ejected in the form of a concentrated jet, which additionally spins at a very high speed, creating a turbine effect. This combination produces an extremely powerful, pinpoint water jet, ideal for cleaning surfaces that an ordinary flat nozzle can't handle.
Where the ROTOJET lance is mounted 68500045?
The lance was designed as an an original accessory dedicated to the Oleo-Mac PW 110C washer. Installation is simple - the ROTOJET lance is mounted in place of the standard lance on the washer gun. Thanks to the factory connector, it fits perfectly into the Oleo-Mac system, ensuring a tight connection and safe use. Replacement is done without tools - just unplug the standard lance and plug the ROTOJET into the high-pressure gun.
Application of ROTOJET lance for PW 110C
The lance is designed for intensive, spot cleaning of hard and resistant surfaces, wherever maximum jet power is needed. It will be ideal for m.in. to:
- cleaning paving stones, concrete slabs, edges and driveways from lichen, algae and perennial dirt,
- removal of oil, grease and soot from garage floors, workshops and utility rooms,
- cleaning rims, sills, wheel arches and vehicle frame components,
- washing of agricultural and construction machinery - Tractors, trailers, excavators, loaders,
- cleaning masonry, fences, decorative stone and other hard surfaces from atmospheric tarnish,
- removal of dried mud and cement of construction tools and equipment.
Full product description:
Increases efficiency by creating a turbine effect creating the right pressure. All models can use a rotary nozzle for high cleaning performance.
Fits the following Oleo-Mac washers: PW 110C
ROTOJET lance for PW 110C 68500045 - maximum cleaning power and efficiency thanks to the turbine effect
The ROTOJET lance 68500045 was designed to take full advantage of the potential of the Oleo-Mac PW 110C washer. Its key component is rotary nozzle, which rotates at a very high speed, dispersing a concentrated stream of water over a small circle. This creates turbine effect, significantly increasing the kinetic energy of water directed at the surface to be cleaned.
In practice, this means that where an ordinary lance with a fan nozzle only rinses away dirt, the ROTOJET lance literally "knocks" the dirt out of the pores of the surface. This is especially noticeable when washing paving stones, rough concrete slabs or stone surfaces, where mud, sand, algae and lichen accumulate in crevices.
Examples of practical applications:
- Before the summer season - Quick refreshment of the cube terrace, removing green tarnish and dark stains, without the need for aggressive chemicals.
- After winter - Cleaning the driveway of road salt, slush and sand, which improves the aesthetics of the property and reduces slippery surfaces.
- On the farm - Regular washing of machines, trailers and tires, where mud and grease strongly adhere to the surface.
Professional fit - turbo lance for Oleo-Mac PW 110C washer for home and semi-professional user
The ROTOJET lance 68500045 is dedicated to PW 110C model, so the user is assured of full compatibility with the device. Factory connections ensure tightness of the system and safe operation at high pressure. No need for adapters or combining with adapters - the lance just "clicks" into place.
Such a solution will be appreciated by both home users and those using the washer in a workshop, small service company or on a farm. The equipment is ready to work right away - it takes seconds to change the lance, which is especially important when you need to switch between a wider, softer jet and a powerful ROTOJET impact.
Examples of daily use:
- In a single-family home - after a quick wash of the body with a standard lance, you can instantly change the tip to ROTOJET and clean the wheel arches, sills and suspension components.
- In a car workshop - the mechanic can quickly wash oil, mud and grease residue off the floor after the repair is completed with the powerful ROTOJET jet.
- In a small cleaning services company - The washer operator switches to the turbo lance for particularly stubborn dirt (e.g., graffiti, old stains on concrete) to effectively complete the job.
Durability, safety and convenience of the ROTOJET lance 68500045
The design of the ROTOJET lance for PW 110C is based on durable materials resistant to high operating pressure and mechanical damage. The solid plastic and precision-made internal components of the rotary nozzle are designed to ensure long, trouble-free operation under demanding conditions.
Thanks to the ergonomic length of the lance, the user can work in a comfortable position without having to bend too much. This is important for longer cleaning sessions, such as when thoroughly washing an entire driveway or wide storage areas.
User safety is enhanced by the fact that the lance is closely matched to the parameters of Oleo-Mac PW 110C washer. The manufacturer has provided for operation with a rotary nozzle in all models, so the use of the ROTOJET lance is within the power and pressure range safe for the pump and accessories.
Practical benefits in daily use:
- Less need for chemicals - powerful, swirling jet is often enough to remove dirt without aggressive cleaning agents.
- Saving time - Surfaces that normally require scrubbing with a brush can be cleaned exclusively with a ROTOJET lance cleaner.
- Less physical effort - ergonomic design allows for comfortable operation, and the intensity of the jet reduces the need for repeated passes in the same place.
Parameters and key technical features of the ROTOJET lance for PW 110C
- Purpose: oleo-Mac PW 110C high-pressure washer
- Tip type: lance with rotating nozzle (turbojet, ROTOJET)
- Function: increasing the effective working pressure through the turbine effect
- Product code: 68500045
- EAN code: 8026619048549
- Material of construction: durable plastic resistant to high pressures and mechanical damage
- Mounting type: quick coupler dedicated to the Oleo-Mac PW 110C system
- Application: intensive cleaning of hard and resistant surfaces, removal of tough dirt
Although the exact working pressure depends on the parameters of the PW 110C washer itself, the use of a rotary nozzle makes the cleaning efficiency increases significantly compared to a standard lance. This allows the user to get the job done faster and more accurately, without putting undue strain on the pump and high-pressure system.
Examples of situations where lance parameters make a difference:
- Surface preparation for painting - Thorough removal of old paint, dust and tarnish from the facade or fence.
- Cleaning of workshop plates - effectively wash away layers of oil and grease without leaving greasy stains.
- Refreshing the elements of small garden architecture - washing of stone flower pots, stairs and retaining walls.
Why choose the original ROTOJET lance for PW 110C?
Deciding on original ROTOJET lance 68500045, you are investing in an accessory designed specifically for your washer. It's a guarantee:
- full compatibility - Perfect match to the gun and parameters of the Oleo-Mac PW 110C washer,
- longer equipment life - No risk of operating outside the recommended pressure or flow ranges,
- safety of use - Factory seals and durable materials reduce the risk of system leakage,
- stable work results - Uniform operation of the rotary nozzle and repeatable cleaning results.
For the user, this means real time savings, less water consumption and the satisfaction of perfectly clean surfaces. The ROTOJET lance is quickly becoming a basic accessory, which are reached for whenever a standard lance proves too delicate.
FAQ - Frequently asked questions about the ROTOJET lance for PW 110C 68500045
Question 1: Does the ROTOJET lance 68500045 fit other washer models than the Oleo-Mac PW 110C?
Answer: ROTOJET lance 68500045 is dedicated to high-pressure washer Oleo-Mac PW 110C. Its connector and operating parameters have been tailored just for this model. Its use with other washers would require appropriate adapters and is not recommended without confirmation of compatibility.
Question 2: For which surfaces is it best to use the ROTOJET lance?
Answer: The ROTOJET lance is ideal for hard and resistant surfaces, such as paving, concrete, stone, steel, rims, agricultural and construction machinery or garage floors. Due to its very strong rotating jet, it is not recommended to use it for delicate materials, such as soft wood, thin plastics or lacquered surfaces sensitive to scratches.
Question 3: Does using a ROTOJET lance increase water consumption?
Answer: The ROTOJET lance does not significantly increase the flow of water, but it increases the efficiency of its use. Thanks to the turbine effect and the concentrated jet, dirt is removed faster, which in practice can mean lower total water consumption compared to long-term washing with a standard lance.
Question 4: Does the ROTOJET lance require special maintenance?
Answer: After finishing the work it is recommended rinse the lance with clean water, to remove any sand or dirt particles from inside the rotary nozzle. It is also a good idea to store the lance in a dry place, away from heavy dirt and chemicals. Proper operation and basical maintenance will ensure its long and trouble-free operation.
Question 5: Can the ROTOJET lance damage the surface being cleaned?
Answer: Due to the very strong, point-like water jet, care should be taken when using the ROTOJET lance. It is recommended start work from a greater distance and gradually bring the tip closer to the surface, observing the effect of the. Properly used lance effectively removes dirt without damaging the hard materials for which it is intended.
Question 6: Can I quickly switch between a standard lance and a ROTOJET lance?
Answer: Yes. The design of the connectors and the ergonomic structure of the lance enable quick exchange between the tips. This is a great convenience in practice - for example, you can wash your car with a standard lance and then put on the ROTOJET to clean the rims, wheel arches and undercarriage.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.