DISCHARGE HOSE 5M FOR PW 121C 68500019
- 5m delivery hose for PW 121C pressure washer 68500019 - heavy duty high pressure hose with dedicated connectors. Provides safe, leak-proof water pumping and comfortable operation for washing cars, terraces and facades.
5M pressure hose for PW 121C 68500019 - professional pressure hose for PW 121C washers
Pressure Hose 5m for PW 121C 68500019 is a high quality working hose designed for use with the PW 121C pressure washer. Designed for intensive use, it guarantees reliable pumping of water under high pressure, ensuring stable operation of the device and user comfort. The length of 5 meters is an optimal compromise between freedom of maneuverability and convenient storage of the cable after the work is completed.
What is the 5M Pumping Hose for PW 121C 68500019?
The 5m delivery hose for the PW 121C is a flexible high-pressure hose dedicated to the PW 121C washer, equipped with appropriate connections for quick and tight connection to the machine. Used to transport high-pressure water from the washer pump to the lance or spray gun. Thanks to its robust construction based on reinforced plastic and reinforcement, the hose is resistant to the working pressure of the washer, bending, abrasion and typical mechanical damage that occurs during work in the workshop, garden or construction site.
Where the 5m discharge hose for the PW 121C is mounted?
The 5m delivery hose is mounted directly to the PW 121C pressure washer - one end of the hose is connected to the output of the pressure pump in the body of the device, and the other to the gun or working lance. Specially selected connectors guarantee secure, tight and fast fixing, eliminating the risk of leaks and pressure drops. Installation is simple: just plug the tip into the appropriate slot on the washer and tighten or snap the connector at the gun. The hose can serve both as original factory equipment and as a replacement part to replace a worn or damaged hose.
Application of 5m discharge hose for PW 121C
The 5m delivery hose for the PW 121C is used wherever the PW 121C pressure washer is used. It is ideal for home farm, workshop, garage, agriculture and smaller cleaning service companies. Suitable for washing cars and vans, garden machinery, bicycles, facades, paving stones, terraces or fences. Due to its ability to withstand high operating pressure, it provides effective and safe removal of dirt, mud, dust and atmospheric deposits from various surfaces.
Pressure hose 5m for PW 121C washer - compatibility, installation and convenience of operation
The 5m discharge hose for the PW 121C 68500019 was designed specifically for the PW 121C washer, so it guarantees full compatibility with the device. Properly selected tips and the diameter of the cable ensure a perfect match with the technical parameters of the washer, which translates into stable operating pressure and full cleaning efficiency. The user doesn't have to worry about additional adapters or adapters - the hose simply fits and is ready to use immediately after connection.
Length of 5 meters provides comfortable operation of the washer around the vehicle or object to be cleaned without the need to constantly move the device. In practice, this means the ability to freely wash an entire passenger car from one position of the washer, as well as to conveniently reach the facade of the building, the stairs or the corners of the terrace. The hose is flexible enough to lay easily on the ground, yet stiff enough not to get tangled during operation.
Installation of the hose is intuitive and does not require specialized tools - the user can replace the old hose with a new one independently and in a short time. This is a major benefit for both individual customers and service or maintenance companies, where speed of response and minimizing downtime is important.
Durability, safety and resistance of the PW 121C discharge hose in daily operation
A key feature of the 5m delivery hose for the PW 121C is its high durability and resistance to the typical loads encountered during pressure washer operation. Made of high-quality plastic and a reinforced internal structure, the cable effectively withstands the operating pressure generated by the washer pump, as well as the temporary pressure surges that can occur when starting or stopping the water jet.
The outer surface of the hose is characterized by increased resistance to abrasion, abrasion and bending, which is especially important when working on rough surfaces such as paving stones, concrete or gravel. Thanks to the appropriate flexibility, the cable is not permanently kinked, which could restrict the flow of water and reduce the effectiveness of washing. In practice, this translates into longer hose life and less need for replacement.
User safety is enhanced by the robust design of the connectors, which minimize the risk of sudden unsealing of the system under pressure. During intensive washing of the car, agricultural machinery or fence parts, the user can focus on the cleaning effect, confident that the cable works steadily and safely.
In everyday use, the hose is great for washing, for example:
- cars, vans and motorcycles,
- garden equipment (lawnmowers, soilers, garden tractors),
- building facades, fences, terraces and driveways,
- agricultural machinery and equipment exposed to contamination with mud or grease.
User benefits - storage convenience, mobility and economy
The 5m discharge hose for PW 121C 68500019 is not only durable, but also very convenient for daily use. When finished, the cable can be quickly coiled into a compact circle for easy storage in the garage, tool cabinet or trunk of the car. The length of 5 meters provides optimal working range without an excessive amount of cable that could hinder the organization of the workplace.
The use of a dedicated hose for the PW 121C washer also translates into economy of use. Instead of investing in universal solutions that do not always guarantee full compatibility with the device, the user chooses a cable designed specifically for this model. Less risk of failures, leaks or damage means lower servicing costs and longer trouble-free operation time.
Thanks to the optimal length and flexibility of the hose, the user gains a lot of mobility when washing. Effortlessly goes around the entire vehicle, reaches hard-to-reach places on the facade, terrace or stairs. Work becomes faster and more comfortable, which will be appreciated by both home users and professionals who perform multiple tasks in one day.
Typical application examples:
- regular washing of the car at home without using a car wash,
- cleaning the terrace after the autumn and winter season from mud and moss,
- refreshing the fence and entrance gate before the summer season,
- washing garden equipment after intensive work on the plot.
Key features of the 5m discharge hose for PW 121C
- length: 5 m - an optimal compromise between working range and storage convenience,
- purpose: PW 121C pressure washer,
- function: pumping high-pressure water from the pump to the lance/pistol,
- robust workmanship made of abrasion-resistant material,
- flexible, yet sturdy construction resistant to bending,
- dedicated connectors to ensure tightness and safe operation,
- ideal as a replacement part to replace a worn or damaged hose.
Frequently Asked Questions (FAQ)
1. Does the 5m discharge hose 68500019 fit any pressure washer?
The hose was designed specifically for the PW 121C washer and is fully matched to it in terms of connectors and operating parameters. Using it with other washers may require additional adapters or may not be possible - check compatibility of connectors and operating pressure before using with another device.
2. Is the length of 5 m enough to wash the whole car?
The length of 5 meters is, in most cases, fully sufficient to freely go around a passenger car or a small delivery truck, especially when the washer is placed near the vehicle. If necessary, the range can be increased by moving the washer to another location.
3. How to take care of a discharge hose to make it last as long as possible?
When you're done, it's a good idea to drain any leftover water from the hose, roll it up into a loose circle, and store it in a dry place, away from sharp edges and heat sources. Avoid pulling the hose over very sharp surfaces and excessively bending it at one point - this will keep the hose flexible and tight for a long time.
4. Can the hose be replaced on its own?
Yes, replacing the 5m discharge hose for PW 121C is easy and can be done by yourself. Simply disconnect the old cable from the washer and gun socket, and plug in the new one, making sure the connectors are properly seated and tightened. After connecting, it is worth performing a short test to check the tightness of the connections.
5. Is the hose suitable for low temperatures?
The hose is resistant to typical outdoor operating conditions, but - as with most plastic hoses - it can become harder and less flexible at very low temperatures. It is recommended to use the washer and hose in positive temperatures and avoid leaving the hose filled with water in the cold to prevent damage to the hose.
```WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.