METAL WHEELS FOR MH175 ROTOVATOR 68209084
- METAL WHEELS FOR MH175 Soil Compactor 68209084 provide maximum traction and stability on heavy, wet soils. Dedicated MH175, steel, 14" x 10", ideal for garden, allotment and small farm.
METAL WHEELS FOR MH175 TILLER 68209084 - PROFESSIONAL GRIP AND STABILITY IN ALL SOIL CONDITIONS
What are the METAL WHEELS for the MH175 soil compactor 68209084?
METAL WHEELS FOR MH175 ROTOVATOR 68209084 is a sturdy set of two steel working wheels, designed specifically for use with the soil tiller MH175. Replaces standard rubber wheels or work blades in situations where maximum traction, stability and full control of the machine are needed when working in difficult off-road conditions. Thanks to the massive design and toothed plates, the wheels bite into the ground, preventing slipping, burrowing of the machine and uneven handling.
Metal wheels designed for use with the MH175 soil compactor.
Wheel diameter (total) 14" - 35 cm
Wheel width - 10" - 26 cm
In practice, this means that the wheels are optimally sized to work both in the home vegetable garden and on larger allotments or farms. They are designed to transfer the full power of the tiller to the ground, making it easier to deep loosen, fill beds and prepare soil for seeding and planting.
METAL WHEELS ASSEMBLY FOR MH175 Soil Compactor 68209084 - FAST REPLACEMENT AND SAFE MOUNTING
The metal wheels are mounted directly on the output axle of the MH175 soil tiller, where transport wheels or working elements are embedded as standard. Thanks to the fine-tuned mounting hole and security holes, installation is simple, fast and requires no specialized tools.
Where the METAL WHEELS for the MH175 soil compactor are mounted 68209084?
- On the drive axle of the MH175 soil tiller - in place of the factory wheels or blades, depending on the work configuration.
- On both sides of the machine - the set forms a stable, wide base, which improves the guidance of the tiller.
- Using factory bolts and locks - this ensures a durable and secure fastening during heavy-duty operations.
Examples of daily use of assembly:
- Preparation of hard, loamy soil - after the installation of metal wheels, the tiller better "pulls" forward, does not slip, and the operator has full control over the working depth.
- Covering potatoes and root vegetables - stable wheels allow the machine to be guided precisely along the rows without deviating from the track.
- Working on inclines or unevenness - Improved traction minimizes the risk of the tiller slipping down a slope or rut.
METAL WHEELS FOR MH175 TILLER 68209084 - USE IN GARDENS, ORCHARDS AND FARMS
The metal wheels for the MH175 are designed for users who want maximum efficiency in field and garden work. They work well where standard solutions fail - on heavy soils, in moist ground and on terrain with varied terrain.
Main application areas:
- Pre-season soil preparation - Deep loosening, mixing organic and mineral fertilizers, breaking up the crusted layer of soil.
- Inter-row cultivation - guiding the tiller between rows of vegetables, fruits and shrubs, without the risk of the machine slipping on the plants.
- Post-harvest maintenance work - Mixing crop residues with soil, preparing the field for the next crop cycle.
Examples of everyday situations in which metal wheels will work perfectly:
- Small vegetable garden by the house - when the soil is heavily compacted after the winter, the metal wheels prevent the soil tiller from "jumping" on the surface and improve the quality of loosening.
- ROD plot or home orchard - wheels allow you to work safely between trees and bushes, especially when the ground is uneven or partially overgrown.
- Small farm - With frequent use of the machine, metal wheels guarantee repeatable, professional cultivation results.
The most important features of the METAL WHEELS FOR THE MH175 Soil Compactor 68209084 - DIMENSIONS, DURABILITY, FUNCTIONALITY
1. Optimal working dimensions
- Wheel diameter: 14" - 35 cm - Ensures proper clearance height and ideal depth of the soil tiller without excessive caving in of the machine.
- Wheel width: 10" - 26 cm - wide tread stabilizes the trajectory, reduces the "dancing" of the machine sideways and improves operator comfort.
- Matching the MH175 model - The parameters of the wheels are precisely matched to the design and power of the tiller, which translates into safety and efficiency.
Application example: During deep cultivation before planting potatoes, wider wheels prevent the machine from being pulled into the furrow, and the corresponding diameter maintains a constant working depth.
2. Exceptional durability and resistance
- Made of high quality steel - resistant to deformation and mechanical damage, which is crucial when working on stony or hard soils.
- Protective painting - paint coating protects against corrosion, moisture and mud, extending the life of the wheels.
- Reinforced design with blades - welded or welded elements create a stable "basket" resistant to many years of use.
Application example: When working after rain, when the soil is heavy and sticky, the metal wheels made of durable steel do not deform and remain fully functional for many seasons.
3. Functional tread design
- Aggressive blades / working teeth - they penetrate the ground, increasing adhesion even on clay and waterlogged soils.
- Open design - reduces clogging with mud and plant debris, making it easier to keep the machine clean.
- Stable guidance - The tread minimizes wheel slippage, translating engine power directly into progressive movement.
Application example: When establishing new beds in virgin, previously unimproved soil, the aggressive wheel tread makes it easier to drive through sod and compacted soil, reducing work time.
Benefits for the user - why you should choose METAL WHEELS FOR THE MH175 SOILGARDER 68209084?
1. Significantly improved work efficiency
- Fewer passes on the same part of the field thanks to better traction and stable handling.
- Better use of engine power - energy is not wasted on slipping, but on real soil loosening.
- Ability to work comfortably at greater depths without the risk of burying the machine.
2. Operator comfort and safety
- Less need to "hold" the tiller by force - the wheels themselves guide the machine along the designated track.
- Better control on inclines and unevenness - reducing the risk of unexpected movement.
- Stable operation even in harsh weather conditions (after rain, on wet ground).
3. Saving time and money
- Less frequent need to repeat passes over the same section of field.
- Less wear and tear on the working parts of the tiller due to better control of the machine.
- Long-lasting durability of metal wheels - a one-time investment works for you for a long time.
Technical data of METAL WHEELS FOR THE MH175 SOILGARDER 68209084
- Purpose: mH175 ripper
- Type: set of metal working wheels (2 pieces)
- Overall diameter: 14" (approx. 35 cm)
- Wheel width: 10" (approx. 26 cm)
- Material: painted steel
- Color: black
- Intended use: improve the grip, stability and traction of the MH175 soil planter
- Product code: 68209084
The choice of such parameters makes the wheels work perfectly with the machine - they are neither too heavy nor too narrow. Instead, they give a noticeable increase in the working capacity of the MH175 soil tiller compared to the lightweight transport wheels.
FAQs - Frequently Asked Questions about METAL WHEELS FOR THE MH175 SOILGARDER 68209084
Question 1: Do the metal wheels only fit the MH175 soil compactor?
Yes, model METAL WHEELS FOR MH175 SOIL PLANTER 68209084 has been designed to work with the MH175 soil compactor. The mounting hole, width and diameter are matched to the axle and design of just this model, which guarantees safe and correct operation.
Question 2: Does wheel assembly require specialized tools?
No, the installation of metal wheels is simple and can be done yourself with basic hand tools. The wheels are attached to the axle of the tiller and secured with the appropriate pins or pins, according to the instructions for use of the machine.
Question 3: What type of soil is best suited for metal wheels?
Metal wheels perform particularly well on heavy, clayey, compacted and moist soils, where standard rubber wheels tend to slip. They can also be successfully used on mixed and sandy soils wherever stability and traction are a priority.
Question 4: Can metal wheels be used to simply transport the soiler?
Theoretically this is possible, however metal wheels are primarily a working component. On hard ground (cobblestones, asphalt) they can leave marks and cause discomfort when driving. For typical transport, rubber wheels or factory transport wheels are recommended.
Question 5: How to take care of metal wheels to make them last as long as possible?
After finishing the work, it is worth remove any soil, mud and plant debris from the wheels, and then leave them to dry in a dry place. From time to time, you can check the condition of the paint finish and, if necessary, touch up minor defects with anti-corrosion paint. Regular maintenance significantly extends the life of the product.
Question 6: Does the use of metal wheels affect work safety?
Yes - positively. Better traction and stability give the operator more control over the machine, especially on inclines and in difficult conditions. However, you should always follow the recommendations of the manufacturer of the tiller, use proper footwear, and exercise caution when working.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.