OLEO-MAC HCI560 56V CORDLESS SHEARS 54379001
- Oleo-Mac HCi560 56V Cordless Hedge Trimmer 54379001 - professional hedge trimmer with induction motor, 60 cm bar, 4 speeds and 180° rotating handle. Ideal for dense, tall hedges.
What are Oleo-Mac HCi560 56V cordless shears 54379001?
Oleo-Mac HCi560 56V Cordless Hedge Trimmer 54379001 is an advanced professional hedge trimmer powered by a powerful 56-volt lithium-ion battery. The device is designed for intensive work in private gardens, parks, green areas of residential communities and gardening companies. Thanks to the combination of a powerful induction motor, a long 60 cm cutting bar and an ultra-low working weight with a battery, the HCi560 provides fast, clean and repeatable cutting even of thick and woody shoots.
It is a tool designed for cutting, shaping and maintenance of hedges, ornamental shrubs and dense canopy with large branch diameters, with full mobility - no power cord and no exhaust emissions.
Where the Oleo-Mac HCi560 56V cordless shears are used 54379001?
Oleo-Mac HCi560 cordless pruner is a handheld device, used directly in the garden or green areas. No permanent installation required - just plug in the appropriate 56V battery (2.5 Ah or 4.0 Ah) and the device is ready to use.
The equipment will perform especially well:
- in home gardens - for forming hedges of tui, yew, boxwood, hornbeam or ligustrum,
- in urban and neighborhood greenery - for quick care of long stretches of plantings near sidewalks, parking lots and fences,
- in professional horticultural companies - as a basic tool for seasonal maintenance of greenery at customers' sites,
- in recreational areas, parks, at hotels, guesthouses and leisure facilities where quiet and emission-free operation is important.
Application of Oleo-Mac HCi560 56V cordless shears
The HCi560 56V shears are designed for efficient, convenient and safe trimming of hedges with large branches and dense foliage. Thanks to a powerful induction motor and high-quality blades, they can make more than 3,500 cuts per minute, which significantly reduces working time on large surfaces.
Typical applications include m.in.:
- regularly shortening and leveling the height of the hedge,
- modeling ornamental shrubs into various shapes,
- rejuvenation of neglected, overgrown hedges,
- precise cutting of the edges of green walls at fences and walls,
- maintenance work after winter and before the growing season.
Thanks to its rechargeable power supply, the device is ideal where access to the mains is difficult or where quiet operation is required, such as in residential areas.
Oleo-Mac HCi560 cordless shears - manufacturer's description and key features
HCi560 cordless shears
BATTERY AND CHARGER NOT INCLUDED.
Very low weight (only 4.8 kg with 2.5 Ah battery), high-quality blades and a powerful motor that provides up to more than 3,500 cuts per minute make this hedge trimmer an ideal product for professional and efficient work on hedges with large branches and dense foliage. Compact, tapered shape and 180° swivel handle allow easy access into even the densest plants.
Technical specifications:
| Battery data | Li-Ion (4.0 Ah or 2.5 Ah / 56 V) |
| Charging time | up to 45 min for 4.0 Ah and 35 min for 2.5 Ah (from zero to 100%) |
| Engine type | inductive |
| Weight | 3.7 kg (without battery) |
| Blade stroke | 35 mm |
| Blade length / cutting | 60 cm |
| Speed | 4 selectable speeds (control display) |
| Working time | 60-90 min (with a 2.5 Ah battery) and 100-150 min (with a 4.0 Ah battery) |
Oleo-Mac HCi560 56V cordless shears - maximum cutting performance and long operating time
Oleo-Mac HCi560 cordless shears are designed to provide the highest possible performance while maintaining user comfort. The induction motor generates up to more than 3,500 cuts per minute, allowing even dense walls of greenery to be pruned quickly and evenly. A blade stroke of 35 mm and a cutting bar length of 60 cm enable efficient cutting of thick, woody branches and the formation of wide and tall hedges.
Thanks to the use of 56-volt lithium-ion batteries, the user can count on a very long operating time on a single charge:
- 60-90 minutes with a 2.5 Ah battery,
- 100-150 minutes with a 4.0 Ah battery.
In practice, this means that in one afternoon you can trim the long hedge surrounding the plot, shape the ornamental shrubs by the terrace and make adjustments to the entrance gate - without the stress of running out of fuel or having to unroll and reel up extension cords.
Comfort and ergonomics - low weight and 180° rotating handle
One of the biggest advantages of the HCi560 shears is their extremely low weight - only 3.7 kg without a battery, about 4.8 kg with a 2.5 Ah battery. This makes the device lightweight, agile and does not put undue strain on your shoulders, back or wrists, even during prolonged use. This is a key feature especially for professionals and users who spend many hours per season with the shears.
The 180° swivel handle allows you to adjust your grip to the current working position - whether cutting vertical hedge walls or horizontal tops, or forming corners. The rotation of the handle makes it easier to maintain a comfortable, natural position of the hand and wrist, which significantly reduces fatigue and the risk of strain injuries.
In everyday use, this translates into:
- easy guidance of the long cutting bar overhead, such as for high hedges along a fence,
- conveniently trim the lower parts of the shrubs without the need for deep bending or kneeling,
- safe maneuvering of shears in tight spaces, around walls, railings or pergolas.
Precision blades and 4 speeds for a perfect hedge finish
High-quality cutting blades are the heart of the HCi560 shears. Working length of 60 cm allows you to cut large areas with a single, even tool guide, making it easier to maintain a perfectly straight hedge line. The 35mm blade pitch also allows it to cope with the thicker, well-wooded shoots often found in older plantings.
The device is equipped with a modern control display, which allows you to choose from 4 working speeds. This allows the user to:
- set a lower speed for delicate plants requiring precision and economical cutting,
- choose a higher speed for intensive molding when speed and strength matter,
- adjust the parameters according to the type of work and thickness of the branch, which extends the life of the blades and increases safety.
Such a wide range of adjustments makes the HCi560 a versatile tool - it will work well for both light seasonal touch-ups and more serious restoration work on neglected hedges. The user always has full control over the pace and nature of the cut, which directly affects the quality of the end result.
Powerful, maintenance-free induction motor - reliability and durability for years to come
Application induction motor this is one of the features that sets the Oleo-Mac HCi560 apart from many competing models. Motors of this type are characterized by high durability, low vibration, and quieter and smoother operation compared to traditional commutator units. No brushes means fewer wear parts and less need for regular servicing.
In practice, the user gets a tool:
- reliable even with intensive use during the season,
- with limited maintenance and replacement of consumable parts,
- generating less noise, which is important in densely built estates or in gardens next to single-family houses.
Safety and full control - ergonomic handles, guards and control panel
Oleo-Mac attaches great importance to work safety. The HCi560 shears feature a double handle with comfortable, non-slip surfaces that provide a secure grip in any position. The front handle surrounds the grip area, protecting the user's hand from accidental contact with branches and the cutting bar.
The cutting bar is protected by a special guard that reduces the risk of damaging the blades when working near walls, fences or metal structural elements. In addition, an easy-to-read control panel with an on-off button and LED indicators informs about the selected working speed and the battery charge level, making it easy to plan further tasks.
Examples of the daily benefits of these solutions:
- safe hedge cutting at mesh or panel fences - the risk of snagging metal is reduced,
- full control of the device when working on a ladder - stable grip reduces the possibility of the tool slipping out of your hands,
- ability to predict the end of work on a single battery charge thanks to the energy level indicator.
Oleo-Mac professional quality - the ideal tool for gardening companies and demanding private users
Oleo-Mac brand has been associated with reliable green care equipment for years. The HCi560 56V continues this tradition, offering build quality that will satisfy the most demanding customers. Robust housing, precision-fitted components and wear-resistant components make the shears ready for many seasons of intensive work.
For gardening companies, this means:
- a tool ready for daily use in a variety of field conditions,
- high work culture, making it easier to keep the team productive throughout the day,
- professional end result that translates into customer satisfaction and positive feedback.
- professional-level equipment at a reasonable price,
- a sense of security and comfort, even if they do garden work occasionally,
- confidence that they are investing in a brand with an established reputation in the horticulture industry.
Technical specifications of Oleo-Mac HCi560 56V cordless shears 54379001
- Model: Oleo-Mac HCi560
- Supply voltage: 56 V
- Battery type: Li-Ion 2.5 Ah or 4.0 Ah (to be purchased separately)
- Charging time: about. 35 min (2.5 Ah), approx. 45 min (4.0 Ah)
- Engine type: inductive
- Blade length/cutting: 60 cm
- Blade pitch: 35 mm
- Number of speeds: 4 (controlled from the display)
- Maximum number of cuts: more than 3500 cuts/min
- Mass: 3.7 kg (without battery), approx. 4.8 kg with 2.5 Ah battery
- Operating time: 60-90 min (2.5 Ah), 100-150 min (4.0 Ah)
- Handle: rotatable 180°
- Product code: 54379001
FAQ - frequently asked questions about Oleo-Mac HCi560 56V cordless shears
Are the battery and charger included?
Not. Oleo-Mac HCi560 56V cordless shears are sold without battery and charger. This allows you to select the battery capacity (2.5 Ah or 4.0 Ah) to suit your individual needs and to use the same batteries in other devices of the 56 V system.
Which battery to choose - 2.5 Ah or 4.0 Ah?
The 2.5 Ah battery provides a run time of 60-90 minutes and is lighter in weight, which will be appreciated by users working mainly in smaller gardens. The 4.0 Ah battery guarantees longer run time - 100-150 minutes - and will be a better solution for gardening companies and people handling large areas of hedges.
Are HCi560 shears suitable for very thick branches?
With a blade stroke of 35 mm and a powerful induction motor, the shears can handle the thicker, woody stems typical of mature hedges. However, for single, exceptionally thick branches, a pruning shear or chainsaw may be a better option.
How often do you need to sharpen your blades?
The frequency of sharpening depends on the intensity of use and the type of plants being pruned. For typical seasonal use in a home garden, sharpening once a year is usually sufficient. For professional work, it is a good idea to check the condition of the blades more often and, if necessary, return them for service or use professional sharpening services.
Do the shears require special maintenance?
After each operation, it is recommended to clean the cutting bar of plant debris and protect it with light oil, which reduces corrosion and extends the life of the blades. The induction motor is virtually maintenance-free - it does not require replacement of brushes as in classic motors.
Can I use scissors in the rain?
For safety reasons, do not use battery shears in the rain or on wet plants if there is a risk of water getting into the electrical components. The tool should be used only in dry atmospheric conditions, according to the manufacturer's instructions.
For whom the HCi560 56V model is intended?
Oleo-Mac HCi560 56V cordless shears are recommended for both demanding private users and professionals. It's an ideal choice for those looking for a strong, durable and convenient tool that can handle the care of extensive and dense hedges while maintaining a high quality cut.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.