STARTER CABLE 4.0 MM OO-SPA560127
- STARTER LINE 4.0 MM OO-SPA560127 - heavy-duty, universal starter cord 100 m for lawnmowers, chainsaws, lawnmowers, generators and pumps. Ideal for service and demanding users.
Starter cable 4 mm 100 m is a high-quality starter rope designed for manual starters in combustion equipment. With an optimal diameter of 4.0 mm and a winding length of 100 m, it is ideal for service shops, workshops and demanding home users who want to always have a durable supply of cord on hand for many machines.
Product STARTER CABLE 4.0 MM OO-SPA560127 is made of durable synthetic fibers with increased resistance to abrasion, stretching and adverse weather conditions. The dense, even braid ensures smooth operation of the cable in the starter guides, and the bright color makes it easy to check for wear and possible mechanical damage.
What is a 4.0 MM STARTER LINE OO-SPA560127 and to which devices it fits?
Starter cable is a flexible rope that is pulled by hand to start an internal combustion engine equipped with a cable starter. In the model OO-SPA560127 used a universal diameter of 4 mm, which fits most popular starters installed in:
- petrol mowers and lawnmowers,
- chainsaws,
- compactors, soilers and scarifiers,
- generators, water pumps, motor pumps,
- leaf blowers, snowblowers and other machines with a manual starter.
Thanks to the large winding of 100 m, the cable can be cut to any length, fitting perfectly to a particular model of equipment - from small chainsaws to large garden and construction machines. In one package, you get a supply that will last for many repairs or regular maintenance of your entire fleet of equipment.
Installation of 4.0 mm starter cable OO-SPA560127 - where and how to use it?
STARTER CABLE 4.0 MM OO-SPA560127 is mounted inside the drum of the manual starter. One end of the cable is attached to the spring-loaded drum, the other to the handle (handle) of the launcher. After winding enough coils, the spring coils the cable, and a vigorous pull on the handle transmits the rotary motion to the motor shaft, allowing starting.
The cable has a smooth surface and sufficient stiffness to help guide it through the starter guides, rollers and grommets. This makes installation quick and easy for both the experienced service technician and the user, who replaces the cable on his own. Enough is enough:
- Remove the starter housing and remove the damaged cable.
- Cut the appropriate length of new cable from the 100m reel.
- Run the cable through the holes and guides of the starter.
- Tie the ends firmly at the drum and handle (usually a flat or double knot).
- Wind the cable on the drum, while tightening the starter spring.
In practice, it usually takes several minutes to replace the cord on a petrol lawnmower or chainsaw, and the use of a solid 4mm diameter cord significantly reduces the risk of breaking again during the season.
The use of 4.0 mm 100 m starter cord in daily operation
Versatility of the model OO-SPA560127 makes it the solution of choice for both professional services and individual users. One spool of line can handle many types of equipment:
- Home and garden - repairing the starter in a lawnmower, trimmer, chainsaw or leaf blower without having to buy separate short sections.
- Forestry and agricultural work - Reliable starting of chainsaws, brushcutters and auxiliary machines that work in difficult terrain conditions.
- Construction and services - Efficient start of compactors, cutters, aggregates and pumps on the construction site, where a cable failure can stop the work of the entire team.
Thanks to its high mechanical resistance, the cable perfectly withstands frequent starts, jerks and operation in dust, moisture or changing temperatures. This is especially important where equipment is heavily used by multiple operators.
Key advantages of 4.0 mm starter cable OO-SPA560127 - durability, safety and economy
Buying 4.0 MM STARTER CABLE OO-SPA560127, you gain not only a product with great performance, but also specific benefits in the daily use of the equipment:
- High abrasion and tear resistance - dense braid and properly selected material ensure long life of the rope even with intensive use.
- Optimum flexibility - the cable is neither too stiff nor too soft, so it winds smoothly on the drum and does not wedge in the guides.
- User security - Robust cable minimizes the risk of sudden breakage during startup, which protects the operator's hands and wrists.
- Saving time and money - one large winding of 100 m allows for multiple cable changes in different devices, which is much cheaper than buying ready-made short lengths.
- Versatility of applications - with a diameter of 4.0 mm, the cable will fit most starters found in gardening, forestry and construction equipment.
For service and maintenance companies, this means less downtime and simpler spare parts management. For the home user - the confidence that the lawnmower or chainsaw will start whenever it is needed.
Technical data of starter cables 4.0 MM OO-SPA560127
| Model / Code | OO-SPA560127 |
| Product type | Starter cable (starter cable) |
| Wire diameter | 4.0 mm |
| Roll length | 100 m |
| Color | Bright (makes it easier to control consumption) |
| Application | Manual starters for combustion equipment (lawnmowers, chainsaws, scythes, generators, pumps, compactors, snowblowers and others) |
| EAN code | 5903383007695 |
Why choose a 4.0 mm starter cable OO-SPA560127 for your equipment?
Choosing the right starter cord has a direct impact on the trouble-free operation of combustion equipment. STARTER CABLE 4.0 MM OO-SPA560127 has been designed to meet the requirements of both professional and hobbyist users. Guarantees a firm grip in the launch handle, smooth reeling on the drum and high wear resistance. This is an investment in the reliability of your equipment, and thus in the comfort of your daily work - in the garden, in the woods or on the construction site.
FAQ - Frequently Asked Questions about the 4.0 MM STARTER LINE OO-SPA560127
Question 1: Will the 4.0 mm line fit my petrol mower?
Most popular lawnmowers and brushcutters use lines with a diameter of 3-4 mm. Model 4.0 mm is universal and usually fits without a problem. If the old cable passes freely through the guides and holes in the starter, the OO-SPA560127 cable will be a suitable choice.
Question 2: What length of line to cut for my device?
The length depends on the design of the starter and the distance between the drum and the handle. The easiest way is to measure the old line and cut a new section of the same length, adding 5-10 cm of provision for knots. From a 100m reel, you can easily prepare sections for many different devices.
Question 3: Is the cable suitable for chainsaws?
Yes, STARTER CABLE 4.0 MM OO-SPA560127 will work well on most chainsaws with a manual cable starter. Thinner lines can be found for very small saws, but the 4mm diameter is the most common and provides high strength.
Question 4: Can the line be used outdoors all year round?
Yes, the cable is made of plastic resistant to moisture and typical weather conditions. It can operate in both low and high temperatures, making it ideal for equipment used seasonally - such as snowblowers in winter and lawnmowers in summer.
Question 5: Do you need special tools to install the cable?
For a standard cable replacement, basic tools are usually sufficient: a screwdriver to remove the housing, possibly pliers, and a knife or scissors to trim the cable. In some starters, a socket wrench is additionally useful for unscrewing the drum. The procedure itself is simple and can be done in-house.
Question 6: Is the cable also suitable for other applications than the starter?
Yes, due to its strength and flexibility, the line can also be used as a auxiliary line - For example, for securing lightweight components, as a signal cord or for temporary workshop work. However, it should be remembered that it is designed primarily as a launching line for combustion equipment.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.