STARTER CABLE 3.0 MM OO-SPA560125
- Durable 3.0 mm starter cord OO-SPA560125 (100 m) for lawnmowers, brushcutters, chainsaws, snowblowers and generators. Abrasion resistant, ideal for heavy duty service and demanding users.
Starter cable 3 mm 100 m is a high quality, durable cable designed for manual starters (starters) in combustion equipment. It is designed for heavy-duty use on mowers, lawnmowers, chainsaws, compactors, snowblowers and other hand-started machines that require reliable, repeatable engine starting.
With a diameter of 3.0 mm and winding length 100 m, starter cable OO-SPA560125 allows multiple replacements in the workshop, service or household. It is the ideal choice for professionals and demanding individual users who are concerned about equipment reliability and reduced downtime at work.
STARTER CABLE 3.0 MM OO-SPA560125 - WHAT IT IS AND WHY YOU SHOULD CHOOSE IT?
The 3.0 mm starter cable OO-SPA560125 is a specialized technical cable used in manual starting mechanisms of internal combustion engines. It is placed inside the starter drum, wound on the pulley, and its outer end is terminated by a handle (grip). Pulling the handle rotates the crankshaft, thus starting the engine.
The most important benefits of using this link:
- High resistance to abrasion - Robust braid ensures long life even with frequent firing of the machine.
- Stable 3.0 mm diameter - ideal for most common starters in gardening and construction equipment.
- Length 100 m - An economical solution for service shops, gardening companies and users with multiple machines.
Examples of daily use:
- Regular start-ups of the petrol mower during the lawn mowing season.
- Multiple chainsaw startup when cutting firewood.
- Firing up a compactor or generator at a construction site.
When you choose starter cable OO-SPA560125, you are investing in a reliable starting of your machines, fewer breakdowns and greater comfort.
WHERE THE 3.0 MM STARTER CABLE IS MOUNTED OO-SPA560125?
The 3.0 mm starter cable is mounted in the manual starter mechanism, usually on the engine casing. Structurally, it consists of a reel with a wound cable, a coiling spring, guides and a starting handle.
Typical mounting locations for the OO-SPA560125 cable:
- Petrol mowers - Both classic mowers and powered models, used in the care of home lawns and communal areas.
- Lawnmowers and trimmers - used in hard-to-reach places, near slopes, fences or around trees.
- Chainsaws - In forestry, orchard work and home firewood preparation.
- Snowblowers, soilers, generators, compactors, cutters - Wherever a manual cable starter is used.
Why proper installation matters?
- Security - properly attached cable minimizes the risk of breaking during jerking.
- Work comfort - adequate length and flexibility of the cord facilitates smooth and light pulling of the handle.
- Protection of the starter mechanism - proper choice of diameter (3.0 mm) prevents jamming or excessive wear of guiding elements.
Practical examples:
- Replacing a worn, fraying cord in a lawn mower that is several years old - with the 100 m winding you will make several or even a dozen such repairs.
- Improving an old chainsaw that has so far been firing with difficulty due to a slipping or breaking cable.
- Restore the efficiency of the snowblower before the winter season - replacing the cable avoids failure when least expected.
APPLICATION OF STARTER CORD 3.0 MM OO-SPA560125 IN COMBUSTION EQUIPMENT
The OO-SPA560125 starter cable is a universal solution for a wide range of machines with manual starting. It can be used as a spare part in the equipment of many manufacturers, as long as the design of the starter provides for a cable with a diameter of 3.0 mm.
Typical applications:
- Gardening equipment - Lawnmowers, tractors with manual start, aerators, scarifiers, scythes and trimmers with combustion engines.
- Construction machinery - compactors, concrete and asphalt cutters, small rollers, diesel pumps.
- Machinery for grounds maintenance - snowblowers, sweepers, leaf blowers.
- Workshop and emergency equipment - Generators, compressors, and other equipment with manual starting.
Benefits of use in daily operations:
- Minimize downtime - having a roll of 100 m on hand, you can quickly respond to a broken cable in any device.
- Service cost savings - replacing the cable yourself is a simple procedure that avoids additional repair expenses.
- Increase the reliability of the machinery fleet - Regular inspection and replacement of worn cables reduces the risk of sudden failure during the execution of the order.
Examples of daily scenarios:
- A gardening company that maintains residential areas - one roll of line is enough for seasonal servicing of many mowers and lawnmowers.
- Farming/agriculture - cable used in saws and auxiliary equipment, ready for immediate replacement in case of damage.
- Construction company - a service technician on site always has enough rope to repair a compactor or cutter on the spot.
DURABILITY AND RELIABILITY OF THE STARTER CABLE OO-SPA560125 - QUALITY FOR YEARS TO COME
Choosing the right starter cord has a direct impact on the the service life of the entire starter mechanism. Model OO-SPA560125 was made of strong synthetic fibers with increased tensile and abrasion resistance. The dense braid makes the rope both flexible and very strong.
Key features affecting durability:
- Resistance to abrasion and mechanical damage - The line does not easily fray where it passes through the guides or eyelets in the housing.
- Dimensional stability - does not overstretch, thus preserving the correct operation of the recoil spring in the starter.
- Weather resistance - fiber structure reduces moisture absorption and the effect of rain or low temperatures on the performance of the rope.
How this translates into daily use?
- You can fire up the machine even a few or a dozen times a day without worrying, without the risk of quickly breaking the cord.
- The machine remains ready to work in a variety of conditions - during spring rainfall, summer heat or autumn dampness.
- You reduce the risk of unexpected failure during important work, such as intensive mowing of a large area or cutting wood before the heating season.
TECHNICAL PARAMETERS OF THE STARTER CABLE 3.0 MM OO-SPA560125
Below is a summary of key product specifications:
- Product type: starter cable / starter cord
- Wire diameter: 3.0 mm
- Winding length: 100 m
- Color: bright (multifilament braid)
- Purpose: manual starters for internal combustion engines in gardening, construction and municipal equipment
- Product code: OO-SPA560125
- EAN: 5903383007671
These parameters make the cable ideal for service and workshops, as well as for individual users. Thanks to the 100m winding, you can easily adjust the length of the cable to fit any machine - just measure the appropriate length, cut and install it.
HOW TO REPLACE AND OPERATE THE STARTER CABLE 3.0 MM OO-SPA560125?
Replacing the starter cable yourself is relatively simple and, with care, can be done even by less experienced users. Cable OO-SPA560125 facilitates installation thanks to its flexibility and stable diameter.
General operating guidelines:
- Regularly check the condition of the cable - if you notice any abrasions, chafe or cracks in the braid, replace the cable with a new one as soon as possible.
- Take care to guide the line properly - Make sure it passes through the original guides and grommets to reduce friction.
- Do not jerk with excessive force - A good cable and a functioning engine should allow for a light, smooth start without sudden jerks.
Practical example:
- In saws used in the forest - the cable is exposed to dirt, dust and wood filings. A 100-meter supply allows you to replace it on the fly as soon as signs of wear appear.
- In petrol scythes used by a gardening crew - several devices work in parallel, and one roll of cable secures the service of all equipment for a long time.
- In generators - a reliable cable is the assurance that in the event of a power outage you will quickly start the device.
FAQ - FREQUENTLY ASKED QUESTIONS ABOUT 3.0 MM STARTER CABLE OO-SPA560125
Question 1: Will the 3.0 mm cable fit my mower/sawmill?
Answer: The 3.0 mm diameter is most commonly used size in many popular mowers, scythes and chainsaws. To be sure, compare the diameter of the old cable or check the device manufacturer's recommendations. If the existing cable was 3 mm, model OO-SPA560125 will be suitable.
Question 2: Can I make several lines from one 100m roll?
Answer: Yes. Typical cord length on a single mower or chainsaw is usually from approx. 1.0 to 2.5 m. This means that from a roll of 100 m you can prepare dozens of sections, which is very cost-effective especially for services and companies with many machines.
Question 3: Can this line be used outdoors, in different weather conditions?
Answer: Yes. The cable was made of resistant synthetic fibers, that stand up well to working in conditions of increased humidity, varying temperatures and dirt typical of gardening or construction equipment. However, it is recommended that the machines be stored under a canopy to extend the life of all components.
Question 4: Does the installation of the 3.0 mm starter cable OO-SPA560125 require specialized tools?
Answer: To replace the cable, you usually only need basic set of tools, such as a screwdriver, pliers and possibly a socket wrench to remove the starter housing. On some models, it may also be helpful to have a vise or handle to hold the starter drum while tightening the spring.
Question 5: How to store unused line from the reel?
Answer: It is best to store the roll in a dry, clean place, away from sharp edges and chemicals that can damage fibers. Leave the line on the original spool - this will make it easier to measure out the right lengths and prevent tangling.
Question 6: Can the cable be used for purposes other than starter?
Answer: The primary purpose of the OO-SPA560125 wire is to work in manual starters, but due to its strength it can also be used as an auxiliary wire in light technical applications, such as for tying, securing small parts or as a training element for learning knots. It is not recommended to use it for purposes requiring high static loads (e.g., belaying people, lifting heavy loads).
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.