CUTTING DISC MOUNTING NUT 61110075R
- Original cutting disc mounting nut 61110075R Oleo-Mac for cutters 746T, 750, 753. Ensures safe and stable blade mounting, reduces vibration and risk of loosening during intensive work. The ideal service part.
Cutting disc mounting nut 61110075R Oleo-Mac - reliable disc mounting on 746T / 750 / 753 cutters
Cutting disc mounting nut 61110075R is an original Oleo-Mac brand mounting element, designed to securely and stably attach the cutting blade on petrol cutters. It's a small part that has a huge impact on the comfort and safety of your work when mowing grass, brush and weeds.
Oleo-Mac cutting disc mounting nut
fits cutter models: 746T / 750 / 753
Thanks to its precision thread and high-quality material, the 61110075R nut ensures that the disc is securely seated on the bevel gear, minimizing the risk of loosening even during intensive long-term use. It is the ideal choice for users who value original parts, which guarantee full compatibility with equipment and long service life.
What is the cutting disc mounting nut 61110075R Oleo-Mac?
Cutting disc mounting nut 61110075R is a specialized fastener, used in professional and semi-professional Oleo-Mac's 746T, 750 and 753 series petrol cutters. Its function is to firmly bolt and hold the cutting disc on the drive shaft or bevel gear of the machine.
Unlike ordinary universal nuts, this model was designed specifically for the requirements and technical parameters of Oleo-Mac lawnmowers. This means a perfect thread fit, the right diameter, height and hardness of the material, which translates into:
- secure holding of the disc even at high engine speeds,
- reduced risk of vibration and operating backlash,
- longer life of both the disc and the drive components.
It is this nut that is responsible for ensuring that the disc does not move, rotate loose or unscrew during operation. In practice, it is one of the key elements to ensure operator safety.
Where the cutter blade mounting nut 61110075R is installed on Oleo-Mac cutters?
Nut 61110075R is mounted directly on the cutting unit of a petrol scythe - at the end of the drive shaft or at the bevel gear, where the cutting disc is installed. It is used as the final element that presses the disc against the mounting flange.
In practice, the assembly is as follows:
- A suitable flange or spacer is put on the drive shaft.
- A cutting disc selected for a specific task (grass disc, brush disc, multi-tooth, etc.) is placed on the flange.).
- The following is screwed onto the protruding thread of the shaft cut-off wheel mounting nut 61110075R, which tightens the disc and prevents it from coming loose.
Thus, this element is located at a critical point in the cutting system and has a direct impact on the stability of the entire working unit. Its correct installation is crucial for user safety.
Use of cutting disc mounting nut 61110075R - for which models and jobs?
Cutting disc mounting nut 61110075R was designed as an original replacement part for:
- oleo-Mac Lawnmower 746T,
- oleo-Mac 750 petrol scythe,
- oleo-Mac 753 Petrol Scythe.
Its application covers the full range of typical tasks performed with these scythes, such as:
- mowing tall grass on wasteland and recreational plots,
- removal of overgrowth, weeds and volunteer plants in gardens, orchards or backyard areas,
- housekeeping work in corporate, municipal and community areas,
- intensive use in green space care service companies.
Due to the fact that it is an original part, it is recommended both for ongoing repair and maintenance, and as a spare item worth having in the service equipment of a workshop or gardening company.
Oleo-Mac cutting disc mounting nut 61110075R - quality, durability and reliability
Original oleo-Mac cutting disc mounting nut 61110075R is distinguished by high quality workmanship and precisely selected technical parameters. The use of sufficiently hard steel and the exact finish of the threads ensure that the component retains its properties even during prolonged high-speed operation.
- Durable material - wear-resistant steel ensures long nut life, resulting in less frequent replacement and lower operating costs.
- Precision thread - Perfectly matched to the shaft of Oleo-Mac lawnmowers, guarantees easy installation and removal, without the risk of "skipping" or breaking the threads.
- Stable disc mounting - the right shape and height of the nut ensure proper pressure on the disc, which minimizes vibration and improves operator comfort.
In everyday use, this means that the scythe works evenly, the blade does not tend to loosen, and the operator can focus on the work instead of constantly checking and tightening the fasteners.
Oleo-Mac cutter blade mounting nut 61110075R for 746T / 750 / 753 cutters - perfect fit and safety
Choosing the right original part is crucial to the safe use of petrol scythes. Cutting disc mounting nut 61110075R, created for models 746T, 750 and 753, guarantees full compatibility with the factory cutting system.
Thus, the user gains:
- Occupational safety - a properly tightened original nut significantly reduces the risk of the blade loosening during cutting, which is crucial for operator protection.
- Fixed operating parameters - The blade remains firmly fixed, which has a positive effect on the uniformity of the cut and reduced operator fatigue, especially during long mowing sessions.
- Certainty of compatibility - the use of a nut dedicated in terms of dimensions eliminates problems typical of replacements (e.g., mismatched threads, too little or too much height, problems with tightening).
In practice, this means that the user of Oleo-Mac lawnmowers does not need to experiment with universal fasteners - by choosing an original nut, he is sure that the part will fit and perform its function 100%.
Convenient maintenance and daily use - practical benefits for the user
Replacing the cutter blade mounting nut is one of the simpler maintenance tasks that most users are able to do themselves. Thanks to the well-chosen dimensions, nut 61110075R allows quick disassembly of the blade for sharpening, replacement with another type or cleaning of the cutting unit.
When you buy this cap, you gain, among other things:
- Saving time - Quick installation and removal of the disc, without fighting with mismatched replacements,
- Reliability - The lack of backlash and thread problems makes any disc replacement quick and hassle-free,
- Comfort in everyday work - Stably mounted blade makes the scythe work quieter and more evenly, resulting in less fatigue.
It is a solution recommended both to individual users caring for home gardens and to professional companies maintaining green areas, for which reliability and lack of downtime in work is important.
Why choose the original 61110075R nut instead of a replacement?
Although various replacements are available on the market, the choice of the original 61110075R cutting disc mounting nut has several important advantages that directly affect the comfort and safety of work:
- Guaranteed compliance with manufacturer's recommendations - the original component meets strict quality standards and has been tested with specific models of scythes.
- Less risk of damage to other components - proper thread and dimensional matching means less stress on the shaft and flanges, which prolongs their life.
- Stable performance for a long time - The original nut retains its properties despite repeated unscrewing and tightening during disc replacement.
In the context of the cost of operating a lawnmower or brushcutter, saving on small parts such as nuts is often illusory - possible damage to the blade, shaft, or even the risk of an accident can be much more costly than buying the original part.
Key features and user benefits - summary
- Genuine Oleo-Mac product - full compatibility with 746T, 750, 753 mowers.
- Secure attachment of the cutting disc - solid pressure, stable operation, less vibration.
- Durable metal construction - Resistance to wear and tear and field conditions.
- Easy assembly and disassembly - Convenient service operation even for the amateur user.
- High operating culture of the device - Stably mounted blade means even cutting and greater operator comfort.
FAQ - Frequently asked questions about the 61110075R cutting disc mounting nut
For which models of scythes the nut 61110075R fits?
Cutter blade mounting nut 61110075R is designed for Oleo-Mac petrol cutters: 746T, 750 and 753. Its use in other models or devices is not advisable if the manufacturer does not provide for such compatibility.
Is nut 61110075R suitable for all types of cutting discs?
The nut is used to attach the cutting discs provided by the manufacturer for Oleo-Mac 746T / 750 / 753 cutters. It can be used with both grass and brush discs, as long as they comply with the recommendations of the manufacturer of the cutter (diameter, mounting hole, thickness).
How often should you replace the disc mounting nut?
There is no rigidly defined exchange interval. The nut should be inspected every time the disc is replaced - if you see signs of significant thread wear, deformation or mechanical damage, it is worth replacing it. Replacement with a new one is an inexpensive way to improve safety and comfort.
Can I use a regular universal nut instead of 61110075R?
The use of universal nuts is not recommended. They may have a different thread, height or hardness of material, which increases the risk of loosening the disc, damaging the shaft or other components of the cutting system. For safety and reliability, it is best to use the original 61110075R nut.
How to properly tighten the cutting disc mounting nut?
The disc should be placed on a clean flange, without dirt and grass residue. The nut should be tightened with a suitable wrench, with feeling - tight enough so that the disc has no play, but without excessive force that can damage the threads. Always follow the instructions in the manual for your specific model of scythe.
Is nut 61110075R corrosion resistant?
The nut is made of metal and designed for outdoor use. Standard use and proper maintenance (e.g. cleaning after work, storing in a dry place) ensure its long life. If there are signs of severe corrosion, consider replacing with a new one.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.