GUIDE FOR SAWS 20" - 51 CM .325"X.058" 1.5 MM 50310207R
- Professional chainsaw guide 20" (51 cm) .325 "x.058" 1.5 mm 50310207R - durable, precise and safe for intensive work in the forest, garden, orchard and on wooden structures. Ideal for 78 link chain.
Chain saw guide bar:
- Length: 51 cm - 20"
- Pitch: .325"x.058"
- Guide link width: 1.5 mm
- number of cells: 78
Guide bar for chainsaws 20" - 51 cm .325 "x.058" 1.5 mm 50310207R is a high-quality work piece designed for chainsaws used by both professional chainsaw makers and demanding home users. It is responsible for guiding the cutting chain, stabilizing the cut and making the work safer. Robust construction and precise technical specifications make it an ideal choice for heavy use in the forest, garden, orchard, and construction and carpentry work.
The guide bar is mounted directly to the body of the saw - in the place of the mounting of the factory guide bar. When the chain is properly installed and tensioned according to the manufacturer's recommendations, the kit creates a precise and efficient cutting system. Model with a length of 51 cm (20") and pitch .325 "x.058" with 1.5 mm guide link and 78-link chain provides the optimum compromise between cutting speed, saw handling comfort and durability of the entire assembly.
20" chainsaw guide 50310207R - high durability, precise performance and safe operation
The key advantage of the 50310207R guide is very high durability. Made of high-grade steel, resistant to deformation and wear, maintains stability even with prolonged and intensive hardwood cutting. Precision machining ensures even chain guidance, which reduces uneven wear and extends the life of the entire cutting set. The lubrication holes used, as well as the appropriately shaped groove for the guide link, promote optimal lubrication of the chain, which directly translates into lower operating temperatures and less friction.
Technical parameters of the guide (length 51 cm / 20", pitch .325 "x.058", 1.5 mm link width, 78 links) guarantee high cutting efficiency while keeping the saw comfortable to use. This configuration is great for cutting firewood, felling medium-sized trees, limbing and household work. It also ensures adequate depth and speed of cutting while maintaining good control of the machine, which is important for both safety and precision of the tasks at hand.
The safety of working with the guide 50310207R is increased by the appropriately shaped nose of the guide, which reduces the risk of uncontrolled bounce (kickback). As a result, the operator has better control over the tool, and the saw itself runs more steadily even in more demanding cross or rip cuts. This is especially important for users who often cut in difficult conditions - for example, on a plot of land, in the woods or near buildings, where precision and control over cutting are crucial.
Application of the 20" guide .325 "x.058" 1.5 mm - ideal for gardening, orchard and forestry work
Universal parameters of the 20" guide .325 "x.058" 1.5 mm make it ideal for a wide range of applications. The length of 51 cm allows you to conveniently cut both smaller and medium-sized logs, thick branches and logs of wood prepared for firewood. Pitch .the "325" provides smooth, fast cutting with a moderate load on the drive unit, so the saw runs efficiently and the user doesn't get tired as quickly.
In the garden and on the allotment, the guide will find use in pruning ornamental and fruit trees, removing old shrubs, preparing wood for the fireplace or building small wooden structures such as pergolas, gazebos and sheds. In the orchard, it will make it easier to cut dry, diseased or damaged branches and remove older trees. In the forest and wooded areas, it will prove useful for preparing firewood, cleaning up windbreaks and maintenance work.
This type of guide is also a popular choice for carpenters and woodworkers. Allows precise cutting of roof truss members, beams, scantlings and construction boards. With a length of 51 cm, thicker sections can be cut without having to turn the material repeatedly, speeding up work and reducing the risk of dimensional errors. It will also be perfect for the home workshop of the do-it-yourselfer who expects versatility and reliability from a chainsaw.
Guide bar assembly for 20" saws 50310207R - quick replacement and compatibility with popular saws
The 20" guide 50310207R mounts in place of the original guide, on the screws that secure the saw's clutch cover. The design of the bar foot and the spacing of the mounting holes corresponds to the standards used in many popular models of chainsaws on the market. This makes replacing the bar quick and intuitive - after removing the cover, unfastening the chain and loosening the mounting bolts, all you have to do is remove the old bar and put on the new one, then put on the chain, adjust the tension and tighten the bolts.
A prerequisite for proper installation is to match the bar to the parameters of the saw and the chain: pitch .325", guide link width of 1.5 mm and number of chain links (78). This fit ensures that the chain runs properly in the bar groove, minimizes the risk of chain slippage and guarantees quieter, more stable operation. The bar's oil holes work in conjunction with the saw's lubrication system to keep the chain lubricated even during heavy use.
The simplicity of replacement makes the 50310207R guide a great choice both as a primary work guide and as a spare for a second shift of work. If the existing guide is worn out or damaged in the field, a new one can be quickly installed and work can continue without extended downtime. For professional users, this means real savings in time and money, and for residential customers - the assurance that the saw will always be ready for action.
User benefits - performance, comfort and reliability of the 20" guide 50310207R
Choosing a guide for 20" - 51 cm chainsaws .325 "x.058" 1.5mm 50310207R, the user gains a number of tangible benefits. First - greater cutting efficiency. Properly selected length and parameters of the chain allow fast processing of firewood, cutting thick branches and logs, as well as efficient construction work. Second - higher comfort. Stable chain guidance reduces vibration, improves cutting precision and reduces operator fatigue, especially during prolonged operation.
Another benefit is reliability. High resistance to abrasion and deformation means that the guide bar retains its operating characteristics for a long time - the guide groove does not expand excessively, and the nose of the guide bar does not wear out too quickly. As a result, it is less often necessary to reach for new parts, which reduces the cost of operating the chainsaw. A well-designed lubrication system allows the chain to maintain proper operating conditions in different temperatures and under varying loads.
For the end customer, versatility of application is also important. One guide allows you to do seasonal work in the garden, prepare firewood year-round, complete carpentry and construction projects, and do more advanced forestry work. This makes the saw equipped with the 50310207R guide bar a versatile tool for home, hobby and semi-professional tasks. This is an investment for years, which translates into greater work efficiency and real time savings.
Technical specifications of the guide bar for saws 20" - 51 cm .325 "x.058" 1.5 mm 50310207R
- Purpose: chain saw guide bar
- Guide length: 51 cm (20")
- Chain pitch: .325 "x.058"
- Guide link width: 1.5 mm
- Number of chain links: 78
- Material: high-grade wear-resistant steel
- Purpose: household, garden, orchard, forestry, construction and carpentry work
- Type: interchangeable bar - installation in place of the original saw bar
- Product code: 50310207R
- EAN: 8026619066123
The use of this guide on the saw allows you to take full advantage of the machine's potential and adapt it to a variety of tasks - from simple cleanup work to more demanding construction and forestry cuts. It is a solid, refined work piece that will meet the expectations of users who value high quality, reliability and comfort of work.
FAQ - Frequently asked questions about the 20" chainsaw guide 50310207R
1. For which saws the bar fits 20" - 51 cm .325 "x.058" 1.5 mm 50310207R?
The bar is designed for chainsaws that work with pitch chains .325", guide link width of 1.5 mm and number of 78 links. Before purchasing, compare the parameters with the specifications of your chainsaw and chain, and check the spacing of the mounting holes in the instructions of the device.
2. Can the guide be used to cut hardwoods?
Yes, the guide is made of durable wear-resistant steel, making it suitable for cutting both soft and hard woods. However, be sure to use the proper cutting chain and properly lubricate the cutting set.
3. How to take care of the slide to serve as long as possible?
Regularly check the chain tension, maintain the correct oil level in the saw tank, clean the bar groove of chips, and periodically turn the bar (up and down) to wear it evenly. This will significantly extend its life.
4. Is the 51 cm (20") length suitable for backyard work?
Yes, the length of 51 cm is very versatile. Allows you to efficiently cut thick branches, trunks and logs while providing good control of the saw. It is a great choice for users who want to carry out both garden work and firewood preparation with one guide.
5. Is it difficult to install the slide yourself?
For someone who has already dealt with a chainsaw, installation is simple and quick. All you have to do is remove the clutch cover, loosen the bolts, remove the old guide bar, install the new one, install the appropriate chain, adjust its tension and re-tighten the bolts. Less experienced people are advised to use the instructions of the saw manufacturer.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.