ENGINE LONCIN LC2V80FD-A V-TWIN V2 27 hp DUAL CYLINDRED HORIZONTAL SHAFT 25,4 mm LONCIN 2V80 MOTOR HONDA , VANGUARD , BRIGGS , KOHLER - EWIMAX - OFFICIAL DISTRIBUTOR - AUTHORIZED LONCIN DEALER
- Factory New, brand new, high quality LONCIN gasoline internal combustion engine
- ENGINE LONCIN LC2V80FD-A V-TWIN V2 27 hp gasoline internal combustion engine TWO-cylinder horizontal roller shaft 25.4 mm MOTOR HONDA , VANGUARD , BRIGGS , KOHLER
LONCIN ENGINE LC2V80FD-A
INTERNAL COMBUSTION GASOLINE V-TWIN V2 TWO-CYLINDER
27 hp Shaft 25.4 mm

One of the largest and most powerful air-cooled engines on the market 27 hp and 51 nm, 764 ccm with electric starter and cooling,engine equipped with charging coil
Loncin uses modern technology in the production of engines and other products to meet customer demands. Much attention is also paid to environmental issues. The result is the production of fuel-efficient engines, which reduces the financial cost of fuel purchases and reduces carbon dioxide emissions into the environment.
Four-stroke,two-cylinder gasoline engine with power 27 KM is a universal power supply device.
It is cooled by a forced-air circulation system that has proven itself in practice.
An electric starter is used to start the engine.
It was mentioned above that this engine model can be installed in a wide range of machines and equipment. It is only necessary to add that their application is not limited to mechanisms found in agriculture, but also in construction, utilities, and municipal management.

Powerful EURO 5, quiet two-cylinder engine with max. 27 horsepower and 764 ccm, with electric start, oil cooling, oil filter, exhaust and electric start activated through the ignition switch.
Engine Replacement Honda GX670 GX630 GX690. and other twin-cylinder engines, such as KOHLER B&S BRIGS & STRATTON
Suitable for high-pressure washers, pumps, chippers, machines, etc.
Coil with 260 W 21ah which is important because often in machines there are electric clutches / valves / lights and many other components that constantly need current support.
Loncin LC2V80FD is a reliable engine with a displacement of 764 cm3. The diameter of the cylinder is 80 mm, piston stroke 76 mm. The shaft is horizontal. Output shaft with a diameter of 25.4 mm is designed for keyed connection. This makes the engine more versatile for domestic use (mainly for agricultural production)
To avoid injury during operation of the mechanism, the motor is equipped with an emergency stop switch that stops the power device in case of danger. Oil level sensor in the crankcase to block operation of the machine in case of lack of oil, which helps extend the life of the engine.
Oil pan can hold 1.8 liters. liquid.
Features
- cast iron sleeve with high strength and wear resistance
- efficient cooling system
- economy, low fuel consumption
- high power, high efficiency
- versatile use
- oil level sensor and overheating prevention system
- easy to use and maintain
- electric starter - easy start
- Two-cylinder V2 engine - high power and torque


Application:
- Single-axle tractors
- Concrete trowels
- Soil Compactors.
- Generators
- Cutters
- Water pumps
- Cultivators
- Shredders
- Construction equipment
- Gardening equipment
- etc.
PARAMETERS:
- Status - new
- Manufacturer - LONCIN
- Model - LC2V80FD-A
- Engine Capacity: 764cc
- Cylinder diameter x piston stroke: 80mm×76mm
- Power max.: 18.0KW (27.0HP)/3600rpm
- Max. torque: 51/2600 N.m/rpm
- Oil sump capacity: 1.8 liters
- Net weight: 53 Kg
- Dimensions (L. x Width. x Wys.): 507mm×502mm×690mm
- Startup: electric starter
- Number of cylinders: 2 (V2)
- Shaft type: cylindrical, keyway; diameter: 25.4 mm; length: 80 mm, length of PTO mount: 80 mm
- Lubrication system: pressure-splash
- Equipment: oil pressure sensor, oil cooler, ignition, fuel pump, flat air filter, muffler with cover, Euro 5
THE PRODUCT COMES FROM THE OFFICIAL DISTRIBUTION TO THE POLISH MARKET !


NOTE: The LONCIN engine is packaged without oil, so it is necessary to pour oil before the first use and it is recommended to read the instruction manual.
Opinions about ENGINE LONCIN LC2V80FD-A V-TWIN V2 27 hp DUAL CYLINDRED HORIZONTAL SHAFT 25,4 mm LONCIN 2V80 MOTOR HONDA , VANGUARD , BRIGGS , KOHLER - EWIMAX - OFFICIAL DISTRIBUTOR - AUTHORIZED LONCIN DEALER
- 5/5Opinion confirmed by purchaseFair price and fast delivery - less than a week from Poland to Germany. In my case the engine replaces a Vanguard V-Twin 18 hp engine. This engine is a a little bigger and the crankshaft has not the same height. So YES it replaces the Vanguard but you have to modify several things like the motor support. So a better description of the outer dimensions and also a multilingual manual (online available) are the only missing things.2025-11-04
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question. If the defective product is covered by a door-to-door warranty, follow the procedure listed on the warranty card.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
1. The warranty is provided by Cedrus Joint Stock Company for a period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases.
The warranty covers goods/devices purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims relating to
damage to the goods/device and claims for loss of profits or incurred costs resulting from damage to the goods/device.
2. For extended warranties of some manufacturers beyond 24 months, annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Simplicity 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),Zenith 48 months or 750 hours (whichever comes first)
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, knives
are guaranteed for 90 days. the 2-belt drivetrain used on IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 models is warranted for 36 months or 300 hours (the warranty covers parts and labor in the first year, parts only in the second and third years). Coilover shock absorbers and all suspension related components are warranted for 60 months with no limit on hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: Trekker series 72 months (annotated in the warranty card and Wiper service application).
3. For equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer) and gearboxes is 24 months consumer purchase or 12 months in the
other cases.
4. Warranty repair is understood to be activities of a specialized nature appropriate for the removal of a physical defect covered by the warranty.
5. Warranty is not covered:
(a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, grinding wheels, holders of components),
- cables: starter, drive, brake, adjustment cables,
- drive components (clutch drums, clutches drive wheels, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- filters for air, oil, fuel, water, hydraulic fluids,
- spark plugs, ignition wires, springs, rubber dampers, diaphragms, nozzles and carburetor valves,
- electrical wires, brushes, brush-holders, fuses, light bulbs, manual and electric starters.
b) damage resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
(c) damage caused by the use of fuel, low-quality mixture.
d) damage that occurred as a result of repairs outside the service network of Cedrus Joint Stock Company.
(e) mechanical, thermal, chemical and all other damages caused by an act or omission by the User.
f) damage caused by natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
(h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, use, lack of care for the equipment (use of non-original materials),
- transportation.
(i) intentional damage to equipment.
(j) maintenance activities - cleaning, replacement of consumables, service inspections.
6. Batteries are guaranteed for a period of 6 months.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that removal of the defect is impossible or economically unreasonable.
10. The complainant should deliver the goods/device to the Authorized Service Center. The goods/device under complaint should be complete and in the condition they were in at the time of damage. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the legitimacy of the complaint within 14 days from the date of delivery by the Complainant of the goods/device. In the case of recognition of the warranty, the Authorized Service Provider is obliged to perform its obligations within 30 days.
12. The warranty card must be properly filled out. Warranty rights can be exercised only upon presentation by the user of a valid warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a warranty for rechargeable devices, the serial numbers of all components of the set must be entered in the warranty card.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and in accordance with Regulation (EU) 2016/679 of the European Parliament and of the Council of April 27, 2016. on the protection of individuals with regard to the processing of personal data and on the free movement of such data and the repeal of Directive 95/46/EC (RODO).










































